08-16-2023, 07:48 AM | #3 |
Lieutenant
404
Rep 458
Posts |
Stock ones went back as a core, wastegates were completely shot so I thought since turbos gotto come out i might as well install a fresh set. I wont be retuning to these, my tuner said he can damage the engine if he starts pushing the car more on stock internals, car will adapt to the turbos and new flow , pure also said that with the stage 1 retune is not necessary
|
Appreciate
0
|
08-17-2023, 08:45 AM | #7 |
Just me
23
Rep 80
Posts |
Why dont you want to tune them up a bit? Stock turbos can run comfortably to 24psi with a tune on stock internals, but maximum stock target torque can be achieved with 18-22psi depending on operating conditions.
|
Appreciate
0
|
08-17-2023, 09:18 AM | #8 |
Joint Chiefs of Staff
24183
Rep 190,777
Posts |
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
08-17-2023, 09:08 PM | #9 | |
Major
364
Rep 1,019
Posts |
Quote:
You can bend rods on stock turbos. |
|
Appreciate
0
|
08-18-2023, 05:36 AM | #10 |
Lieutenant
404
Rep 458
Posts |
My tuner said the vehicle will adapt to improved flow/turbo potential, said s63 can spit the rod bearing if he starts to push it, engine has plenty of potential but suggested stock internals would be risky to play with. Reliability is key for me, i take my f85 on family trips, so i kept it at that.
|
Appreciate
1
iam_tylerbrown2.50 |
Post Reply |
Bookmarks |
|
|