07-10-2021, 01:25 AM | #1 |
New Member
12
Rep 29
Posts |
Le Gran Coupe - My 228i xDrive [[ Build // Progress ]]
Hi guys/gals!
This is my 228iX, I needed a new daily, and after some failed searches for a 2020 440ix GC... i came across small chonky sedan. I've always had a thing for 4drs, and it was about time I owned a some what new car with some new tech. Loving the heads ups display, digital dash, blind side, navi.... love it! My background is Hondas, my forever going on project is a K24 swapped Integra Sedan, FWD non AWD haha. 240 HP 190 TQ all motor. debating on turbo or AWD next on it. most likely turbo just like the DD. I do admit, the 228i is not fast, but it has just about everything i wanted in daily. Definitely handles better than my integra, especially with the xDrive. I'm hoping later down the future there can be some upgrades to increase the 50% distribution to the rear. No real intent of going fast in this car, but maybe better handling, maybe snow, possible towing a small camper? I'll be damned they mate a K24 to this thing somehow, haha. Too bad the back doesn't open up like a hatch like a true GC. Really wished the US got the M135i tho, Anyone want to trade wheels? looking for BMW 18"x8 M V-spoke Forged Wheels, Style 554M. i have 19" M Double-Spoke Bi-Color Wheels First mod to do, find some black mesh/diamond grill. Next would be a wireless charging retro fit, then front lip and OEM BMW wheels. then suspension, so far the KW Variant 3.0 has my eye. IG: KillaKhoa . Last edited by KillaKhoa; 09-25-2021 at 10:12 PM.. |
08-12-2021, 07:30 PM | #2 |
New Member
12
Rep 29
Posts |
A couple goodies for the GC
OE Grill - [[ Part#: 51-13-8-080-494 ]] OE Charging Pad - [[ Part# 5A0E551]] Bimmercode / OBD2 [[ Part$ CX101 ]] M Style CF Mirror Caps - [[ EBAY]] Last edited by KillaKhoa; 08-22-2021 at 08:18 PM.. |
Appreciate
1
AlpineAl2782.00 |
08-12-2021, 07:50 PM | #3 |
First Lieutenant
278
Rep 366
Posts
Drives: 2023 BMW M240i xDrive
Join Date: May 2021
Location: Canada
|
Where did you get the mirror caps? And how do you install them if it's way I wanna do that to my 228i and get a carbon fibre cover for the shark fin antenna.
|
Appreciate
0
|
08-15-2021, 12:09 PM | #5 | ||
New Member
12
Rep 29
Posts |
Quote:
Quote:
Had some time, started to get to installing the wireless charge pad. Price of this project $120 OE DIY VS $500 OE Dealer option Seemless and quick install. 5mins MAX. However, i did take the extra step to try and locate the extra plug that connects to the chip located on the side. No go, i was not able to find it. I did read that German manufacturers are very specific when it coms to electrical harnesses. Any how, not sure what portion does, but I can confirm the wireless charge pad does work. I know theres an attached plug because i removed one from another vehicle, its a single thick black wire. I initially thought it was a power cable for fast charge (similar to the USB plug). But since it works, i kind of left it at that. i made the assumption the harness would have the extra cord somewhere. I was wrong... this aint no honda, lol. Last edited by KillaKhoa; 08-22-2021 at 07:45 PM.. |
||
Appreciate
2
AlpineAl2782.00 jealonso0.00 |
08-22-2021, 01:37 PM | #6 |
New Member
12
Rep 29
Posts |
Price of this project $350 Ceramic Tint VS No Protection & Free Sun Beams
With the extreme heat coming and going... and with a black car w/ leather interior, I figured tinted windows is definitely required, so I went with 20%, Shout out to BlownLSX for sharing that info. Really liked how the tint looked on on his GC. Went with Ceramic for the extra protection @ my local tint shop. so Technically 7 windows. Lifetime warranty. After typing this... i realized i probably need to get the big ass sun roof tinted also... maybe a tinted banner for the front windshield too, who knows. so onto the new new install Price of this project was only $116 shipped for the Ebay M Style Mirror Caps in Carbon Fiber VS $600+ OE Reg Style Carbon Fiber or $250+ for Aftermarket M Style So far the quality is nice, its thick, so im assuming they use a basic mirror cap made of ABS plastic, probably lay down a thin layer of the CF weave and a thick layer of resin. But overall it feels durable, the CF weave looks good. I say its x3 the weight of the original. i give it a 8/10. Install is less than 5mins. Its basic, tools not needed. If you have hands, with a firm tug they'll come off. I do suggest if you plan on replacing the blinkers to custom sequential ones, do it all at the same time. i'm still iffy on those. i would want the front headlight turn signals to be sequential too? Love how these CF mirror caps look, definitely want the CF shark fin next. However that 3D CF lip is ridiculously expensive. C'monnnnn CHINA/Ali baba! rofl. ***ANYONE HAVE TIPS OR SUGGESTIONS ON THE GRILL REMOVAL? BUMPER REMOVAL A MUST? TRIM TOOLS REQUIED?*** This is my next task, Obviously bumper removal is best but takes time, was curious if there's an cheat code. . Last edited by KillaKhoa; 08-22-2021 at 07:34 PM.. |
Appreciate
0
|
08-22-2021, 02:12 PM | #7 | |
First Lieutenant
227
Rep 345
Posts |
Quote:
|
|
Appreciate
1
KillaKhoa11.50 |
08-30-2021, 08:23 AM | #8 |
Private
62
Rep 75
Posts |
I think these days most of the mirror caps are quite easy to install, I got mine and it came with an installation guide. Literally 5 minute job!
|
Appreciate
1
robbieboi707.50 |
08-30-2021, 10:46 AM | #9 |
Private
34
Rep 70
Posts |
That's a good looking ride, Sir.
|
Appreciate
2
robbieboi707.50 KillaKhoa11.50 |
09-03-2021, 07:05 PM | #11 | |
First Lieutenant
227
Rep 345
Posts |
Quote:
|
|
Appreciate
0
|
09-07-2021, 01:12 AM | #12 |
Enlisted Member
20
Rep 37
Posts |
Ha! Maybe. The 228i GC seems quick enough on paper but it's pretty heavy and mine can't seem to get out of it's own way in the real world. It'll eventually get there, but it sure wallows for a while.
I tried to like my 228i, but for a variety of reasons, I'm finding that increasingly difficult. Sorry for the off-topic. The OP does have a lovely car. |
Appreciate
0
|
09-07-2021, 11:18 AM | #13 | ||
New Member
12
Rep 29
Posts |
Thank you. Thank you. Yours is beautiful.
Thank you. I like the new upgrades u installed. Quote:
Quote:
And thanks… I’m building the GC to my liking. Next is the stance. Had some time this Labor Day weekend. Price of this project $165 OEM Mesh Grill VS $200+ Retail Bumper removal isn’t a must. But trim tools will be required. I remove mines off since I was going into this blind. Install time is about an hr and the end result is beautiful. |
||
Appreciate
0
|
09-08-2021, 08:56 AM | #14 | |
New Member
6
Rep 26
Posts |
Quote:
|
|
Appreciate
0
|
09-08-2021, 09:50 AM | #15 | |
Registered
0
Rep 1
Posts |
Quote:
|
|
Appreciate
0
|
09-08-2021, 11:31 AM | #16 | |
Enlisted Member
20
Rep 37
Posts |
Quote:
In truth, the rest of the car (voice control, navigation and aggravating safety features) are starting to wear on me, too. I suspect the car will be gone next year after I ride through some of the devaluation. I guess I’m not really a “BMW guy” after all. Still like the looks and love the interior, though. Last edited by Fix_The_Cigarette_Lighter; 09-08-2021 at 11:38 AM.. |
|
Appreciate
0
|
09-08-2021, 01:44 PM | #17 | |
New Member
6
Rep 26
Posts |
Quote:
Anyway sorry to derail the post OP. |
|
Appreciate
1
|
09-09-2021, 10:08 AM | #18 |
Second Lieutenant
142
Rep 296
Posts |
If you have the gearbox in comfort mode then lag can come from there. I find the best settings to be sport individual with everything set to comfort aside from the gearbox set to sport..
__________________
Series 2 GC M235I xDrive, Snapper Rocks, Pro, Tech and Drivers Assistant Packs, 19" 557M Wheels. DTUK Tuning Box.
|
Appreciate
0
|
09-16-2021, 11:11 PM | #19 | ||
New Member
12
Rep 29
Posts |
Quote:
Quote:
onto the next: Price of this project is less than $20 CF Wrap center console removal is pretty simple, its all clips starting from the armrest. My first time attempt with wrap, some imperfections. hard part was the tight curves. maybe the center a/c buttons and vents next? |
||
Appreciate
0
|
09-17-2021, 03:20 PM | #20 | |
Private First Class
50
Rep 109
Posts |
Quote:
|
|
Appreciate
0
|
09-17-2021, 06:13 PM | #21 |
Private
10
Rep 54
Posts
Drives: 218i MSport GC (F44)
Join Date: May 2021
Location: Belfast
|
I did the CF wrap also, but then started thinking where else to put it, I didn’t want CF everywhere. So I went with this silver type CF effect.
|
Appreciate
0
|
09-18-2021, 11:57 PM | #22 | ||
New Member
12
Rep 29
Posts |
Quote:
Quote:
so, with a black car, it gets dirty sooooo quick. basically within a day, a week is filthy. so i had to get a pressure washer setup and try to wash it every other week or so. try not to waste water and use a car wash instead when its super dirty. i usually go handless to prevent any swirls. Nothing to fancy. basic setup, maybe $150 in all. Chem guys foam. Forgot to snap pics of the after but after a dry, i wipe it down with some Adam's detail spray wax. Its a nice finish Last edited by KillaKhoa; 09-20-2021 at 12:56 PM.. |
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|