BMW Coding Thread

[jc68]

My X5 does not have keyless entry but it has the ribbed door handle. Can it be programmed to activate keyless entry or does it need additional hardware? It already is keyless engine start stop. Thanks.

[jrhav]

Originally Posted by Almaretto

I-Step

I'm on F025-16-11-503

[Almaretto]

Originally Posted by jrhav

I'm on F025-16-11-503

So January/February software.

[jrhav]

Originally Posted by Almaretto

So January/February software.

Yep... so do you know what I'd need to do to change the My Vehicle image to an X5 from the default sedan? I'm assuming this is a coding setting, but am not sure where to look.

Thanks!

[Almaretto]

Originally Posted by jrhav

Yep... so do you know what I'd need to do to change the My Vehicle image to an X5 from the default sedan? I'm assuming this is a coding setting, but am not sure where to look.

Thanks!

Likely update software, but not sure as I do not have ID5.

EDIT: It is all done through FP. So as long as you have newer software, your chassis will display correctly.

[driftmotion]

Anyone in the DMV (washington DC area) that wants to help me get coded PM me

[SCA]

Originally Posted by Marky Mark

I recently got the BimmerCode iPhone app and the vGate 2 wifi adapter, I am eager to try it out but will not have the opportunity to do so anytime soon...

Marky Mark, have you coded yet? If so, how was your experience and what features did you code?

[Aleksandr]

Hello, can someone PM me the latest software links? Mine is 2015 X5
Also link to good coding guide for beginners.

Question- Mine is F15, shall I choose F025 for connection?

[shawnsheridan]

Originally Posted by Aleksandr

Hello, can someone PM me the latest software links? Mine is 2015 X5
Also link to good coding guide for beginners.

Question- Mine is F15, shall I choose F025 for connection?

PM sent.

E-Sys Launcher Car Series - F015
E-Sys Connection Target - F025

[smm68]

I had my X1 F48 reprogrammed today and of course all coding setting are gone.

I did not check the I-step yet, but I have the following
esys=3.27.1
launcher premium=2.5.3 build 108
psdzdata=3.59.5

I would appreciate, if it exists, the latest version for my car.

Thanks in advance

[shawnsheridan]

Originally Posted by smm68

I had my X1 F48 reprogrammed today and of course all coding setting are gone.

I did not check the I-step yet, but I have the following
esys=3.27.1
launcher premium=2.5.3 build 108
psdzdata=3.59.5

I would appreciate, if it exists, the latest version for my car.

Thanks in advance

PM sent.

[Aleksandr]

Many thanks.

[smm68]

Originally Posted by shawnsheridan

PM sent.

thanks

[smm68]

Hello

I tried to install the new launcher premium but I got an error message saying that I need at least 2048MB of physical memory.
My system (tablet) has exactly 2048MB but a small part is reserved for H/W and won't let me install it.

Any hint on how to fix this issue? The previous version of launcher premium (2.5.3) did not have this problem. Can I use the older version?

Many thanks

[shawnsheridan]

Originally Posted by smm68

Hello

I tried to install the new launcher premium but I got an error message saying that I need at least 2048MB of physical memory.
My system (tablet) has exactly 2048MB but a small part is reserved for H/W and won't let me install it.

Any hint on how to fix this issue? The previous version of launcher premium (2.5.3) did not have this problem. Can I use the older version?

Many thanks

You should use PC with > 2Gb available RAM.

Short of that, you can use E-Sys Launcher Premium 2.6.2 Build 124:

https://mega.nz/#!A1QwmTRb!uH0HwUwCd...bvhe72OtWcyaGU

[smm68]

Originally Posted by shawnsheridan

You should use PC with > 2Gb available RAM.

Short of that, you can use E-Sys Launcher Premium 2.6.2 Build 124:

https://mega.nz/#!A1QwmTRb!uH0HwUwCd...bvhe72OtWcyaGU

ok thanks, I hope it works with the latest esys version

[shawnsheridan]

Originally Posted by smm68

ok thanks, I hope it works with the latest esys version

It works fine with latest E-Sys 3.28.1.

[Aleksandr]

Originally Posted by shawnsheridan

PM sent.

E-Sys Launcher Car Series - F015
E-Sys Connection Target - F025

Hi, I requested pin for activation 3 days ago from token master and no reply yet. can somebody confirm the mail is correct:*************************

[smm68]

Originally Posted by shawnsheridan

It works fine with latest E-Sys 3.28.1.

can't start the launcher, it asks for activation code. I sent an email to tokenmaster but no answer

[shawnsheridan]

Originally Posted by smm68

can't start the launcher, it asks for activation code. I sent an email to tokenmaster but no answer

Unfortunately TokenMaster is out of pocket. No one knows when he will return either.

[Fsune1]

Is anyone available to help me with coding via team-viewer today!! I installed the 6WB cluster in my F15 and tried coding myself but getting lots of errors.

[M6BMWDriver]

Hi All,

For a G30 2017, the max speed for video in motion is about 40mph? Can i make it 150mph?