Coding your X5 the easy way

[grim69]

Can someone help me please im trying to code my fog lights to turn on with my welcome light on my 2015 f15 and this is the code i found for it

3063 MAPPING_NEBELSCHW_L_PART_OF_WL set to: werte=01
3063 MAPPING_NEBELSCHW_R_PART_OF_WL set to: werte=01


on my ecu the line only reads

MAPPING_NEBELSCHW_L_PART_OF

then when you go into it its either off 00 , or FLB_UEA 03 changing to the 03 option seems to do nothing and adding 01 manualy also does nothing

does anyone know if theres some other code line to change to make it work or is it becaue i have the led fog lights with bi xenons and adptive lighting that i cant make them work? any help would be appreciated thank you

[R4ndy]

Hi, need some assistance, want to retrofit speed limit info, checking my BMW in real OEM there is a retrofit option
01 Retrofit speed limit info IBAC 1
65502184753
only in conjunction with
-- Enabl.code retrofit road sign detection ASAP 1
66502444948
After ordering 2 444 948 please
download enabling code 007E via ASA


Is there anyway in enabling this with Bimmercode as opposed to purchasing essentially a licence to retrofit via ISTA?

Some of my vehicle options
S5AC High-Beam Assistant
S5AG Lane Change Warning
S5AL Active Protection
S5AS Driving Assistant
S5DL Surround View

[shawnsheridan]

Originally Posted by R4ndy

Hi, need some assistance, want to retrofit speed limit info, checking my BMW in real OEM there is a retrofit option
01 Retrofit speed limit info IBAC 1
65502184753
only in conjunction with
-- Enabl.code retrofit road sign detection ASAP 1
66502444948
After ordering 2 444 948 please
download enabling code 007E via ASA


Is there anyway in enabling this with Bimmercode as opposed to purchasing essentially a licence to retrofit via ISTA?

Some of my vehicle options
S5AC High-Beam Assistant
S5AG Lane Change Warning
S5AL Active Protection
S5AS Driving Assistant
S5DL Surround View

No, need 7E FSC Enabling Code, which must be Imported with E-Sys, and then Coded.

[R4ndy]

Originally Posted by shawnsheridan

No, need 7E FSC Enabling Code, which must be Imported with E-Sys, and then Coded.

Is there a retrofit option using ISTA as opposed to ESYS, if I was to purchase the genuine FSC code?

(Just recently added retrofit coding option for my BBK, that worked fine via ISTA)

[shawnsheridan]

Originally Posted by R4ndy

Is there a retrofit option using ISTA as opposed to ESYS, if I was to purchase the genuine FSC code?

(Just recently added retrofit coding option for my BBK, that worked fine via ISTA)

There should be.

[CMYACHTIE]

Originally Posted by notchy

I had to search around and found out that the instructions via Bimmercode to fix the tailgate slam actually has different steps to follow for any F15 from the year 2017 and newer.

Hope this helps anyone trying to get this to work.

Go to:

Tailgate Function Module -> 3011 APPL_PLG_SPEED_PROFILE

Change the values to '00A0' in the following 4 sections.

ProfileCloseStopNode1PwmPlg = 00A0
ProfileCloseStopNode2PwmPlg = 00A0

ProfileCloseStopNode1PosPlg = 00A0
ProfileCloseStopNode2PosPlg = 00A0

After I did this my trunk does not slam anymore. It took a few hours of scouring to piece together the info.

Tried the above yesterday as my dealer performed a free(recall) software update recently on my 2018 F15, which made my hatch noisy again and the final result has reduced my slam once again.
However the steps I had to go thru in BimmerLink were somewhat different than the four lines above, unfortunately I didn’t document the steps I had to go thru but one of the lines didn’t have the option of 00A00 and during the final coding there was another line that popped up, which I selected the 00A00 for which allowed me to complete the coding process.

Just a heads up for anyone going thru the same struggle as I……

[50iXman]

waittttt can we actually code apple cart play/andrioid auto to work?

[shimmy23]

Originally Posted by 50iXman

waittttt can we actually code apple cart play/andrioid auto to work?

I believe you need a 17 or newer.

[callmeorsan]

Originally Posted by Maverik259

You've heard conflicting stuff cuz it depends. Most error codes will reset by just shutting the car down for awhile. Some may not which require to be cleared. BimmerLink isn't the only option just the easiest. But as you said since you don't have apple products then not sure if the question cuz you can't download it anyway lol. Use esys or ISTA.

Wouldnt protools be just as good?

[irzayev]

Hi everyone, is there any way to turn on fog lights with AngelEyes in night mode?

[Waka99]

Originally Posted by 50iXman

waittttt can we actually code apple cart play/andrioid auto to work?

Originally Posted by shimmy23

I believe you need a 17 or newer.

I have a 2017 X5, can anyone elaborate on this please?

[RED_Y_]

Originally Posted by Waka99

I have a 2017 X5, can anyone elaborate on this please?

Check you VIN, if your head unit is compatible you need set of FSC codes to enable Apple CarPlay. No Android auto.

[besi44]

Helloo
Does someone know the coding to display the M logo or M50i on the IC
And on the HUD
My car is x5 50i 2016

[besi44]

Is it possible if i code the IC layout to 330km/h to get the M logo
Or the X5M logo on the dash
Can i get a different startup animation on HUD cause it shows connected drive

[AJFord]

Hi all, I have enabled digital speed readout via Bimmercode, wondering if anyone knows if there's any coding to make it larger so that the speed readout takes up the whole display screen? Thanks in advance

[JoshMcMadMac]

With the car running, I can lock it with comfort access or the FOB but the horn honks twice. Is there a way to code that out?

[shawnsheridan]

Originally Posted by JoshMcMadMac

With the car running, I can lock it with comfort access or the FOB but the horn honks twice. Is there a way to code that out?

Need to FDL Code CLM_HORN_AT_SECURE or VAM_HORN_AT_SECURE = nicht_aktiv.