12-23-2016, 02:24 PM | #1 |
4496
Rep 1,862
Posts
Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com
|
bootmod3 Stage 2 93 octane OTS map - dyno - 663whp / 666wtq
Thought we'd share a dyno from a recent tune on a customer S63tu car in Florida done through our dealer Miami Performance Inc.
Car: M6 Mods: Downpipes, bootmod3 OTS Stage 2 93 octane map Octane: pump 93 octane (98RON) Boost on this run hit 24psi down low in one spot but levelled off to 23psi by ~5800rpm, 21psi at 6600rpm and 19.5psi at redline. One item to point out, at this power level blending in ethanol is not a good idea as you can see in the bm3 log posted below that the HPFP (high pressure fuel pump) is falling under target to 1600psi from the targeted 2900psi. If you've ever dealt with misfires on your S63tu when pushing power, and not using meth or secondary PI injection to supplement and help the fuel system, then we suggest dataloging and paying attention to your HPFP pressure. Midrange power/torque we feel is already maxed out due to where the HPFP is sitting unless we lean it out a bit to 5500rpm and to go higher in that area you'll need meth which is easiest to install or a PI kit that we don't think exists for the S63tu today yet. This is the current state of our OTS Stage 2 93 octane map. We're looking to get a bit more dyno runs in as its very likely there's a few more reliable ponies in there at 6k rpm. Let us know if any questions at all. |
12-26-2016, 02:55 PM | #2 |
IG @bmwF9xG80
3813
Rep 7,593
Posts
Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL
|
vince7870 jcfay And still reliable powerband no jb4 tricking and no overpriced rip off dinan lol.
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80 |
Appreciate
0
|
12-26-2016, 03:28 PM | #3 |
Captain
166
Rep 710
Posts |
what does an m6 tune have to do with the x5m? just spam for your product?
__________________
Cars: 2016 BMW X5M. 2017 BMW X1.
Bikes: 2007 BMW F650GS. 2014 BMW K1600GTL Exclusive. 2014 BMW HP4 Competition. 2016 BMW K1300S. |
Appreciate
0
|
12-26-2016, 03:29 PM | #4 |
IG @bmwF9xG80
3813
Rep 7,593
Posts
Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL
|
They have the same engine
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80 |
Appreciate
1
infamousdiz603.00 |
01-06-2017, 02:41 PM | #5 |
IG @bmwF9xG80
3813
Rep 7,593
Posts
Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL
|
BrooklynX6M EnzoRacing in long island can unlock and this dyno is only revision1 of S63tu
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80 |
Appreciate
0
|
03-11-2020, 09:43 PM | #8 |
IG: @88jae88
1621
Rep 1,734
Posts |
Perfect can't wait.
__________________
IM POOR..
|
Appreciate
0
|
03-25-2020, 06:50 PM | #11 |
IG: @88jae88
1621
Rep 1,734
Posts |
It doesn't need DP to run 91 octant stage 1 but you will need it for stage 2. Also the percentages is on the pro tuning freaks website.
__________________
IM POOR..
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bm3, bmw, bootmod3, protuning freaks |
|
|