FS: 50i Front & Rear Brakes - custom paint options – calipers / rotors / pads / lines

[CHECKERED]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

For sale are 50i brakes taken from a 2017 X5 with 28K miles, I put another ~10K miles, front pads are original. Rear rotors have been machines once before. Rear pads have been replaced and have ~10K miles on them

Not included that you might need: 50i specific dust shields (or trim your own), front caliper carrier to hub bolts (or you can reuse your current bolts)

Front Kit:
Rotors, pads, calipers, caliper carriers and brake lines.

This set has been ‘sand blasted’ using 80 grit glass beads to get ready for paint, has one layer of high temp primer.

Option 0: “as-is” I send you the hardware as pictured taped off and ready for paint.

Option 1: For a small fee I can paint the rotor hats and calipers in a color of your choice, if I don’t have the color on hand there is an additional fee to cover the cost of paint, you can also ship me any custom color (for example wheel or body matched) or I can source one on your behalf.

Rear kit:

Option 0: “as-is” I send you the hardware as pictured – non prepared

Option 1: for an additional fee I can sand blast / prime to be ready for paint, the cost is more substantial because this is a 2-day job

Option 2: sand blast above + custom paint of your choice (small fee)

If you are in New England:
If you live in MA/NH/CT/ME area, I can install this kit for an additional fee at your location or mine in southern NH, (about half of what the dealer will charge) + complete brake fluid flash and optional MPBK coding.

Please inquire (via PM is best) for your specific needs prices vary significantly based on the type of work you are looking for. Anywhere from 450 just for hardware all the way to ~1100-1200 that includes hardware, paint and installation.

[CHECKERED]

bump

[CHECKERED]

bump

[Nexo]

I’m interested… all the hardware tho. Don’t need the install

[CHECKERED]

Originally Posted by Nexo

I’m interested… all the hardware tho. Don’t need the install

sent you a PM

[CHECKERED]

bump

[Maverik259]

Need to get a hold of some M calipers!

[CHECKERED]

not sure what's that about ^^^

but thanks for the bump

[CHECKERED]

bump

[Maverik259]

Originally Posted by CHECKERED

not sure what's that about ^^^

but thanks for the bump

I was simply saying you should do this for M calipers not just 50i.

[CHECKERED]

Originally Posted by Maverik259

I was simply saying you should do this for M calipers not just 50i.

I see...offer this as a service

I did the blast and paint on my MPBK, and since I had everything already set up I also did the front from 50i,

unfortunately, its not really worth my time based on the amount of effort involved, so just trying to offload my 50i kit with a bonus for the buyer.

[CHECKERED]

bump