(100%) How to FLash NBT EVO with Esys + ICOM / ENET (DIY)

[Wofy]

Originally Posted by shawnsheridan

No, need new custom FSC Code set that loads via ENET Cable. Your PM function is disabled. Send one when enabled.

ok, will do.

[samsonx]

Originally Posted by SaNGRia

No. Flashing will update the fw and will remain with the same settings.
So what type of battery hybrid contains? Does it good for 30-40 amp draw for 45 min?

Originally Posted by MrT_A

Hi, wondering if anyone used this guide to upgrade their plugin hybrid car? I have a F15 and I am guessing if the batteries are fully charged I don't need any jumper cables or external chargers.
I have NBTevo version K , I got USB codes to change from ID5 to ID6 lite and enable Apple car play ( half screen) & maps. I have seen posts where that caused issues when upgraded to NBTevo version X. Would I have to code all these back in after the flash?
Thanks

The plugin hybrid battery is high voltage and and not connected in that way to the vehicle system power; those are powered via 1 or 2 auxiliary batteries from my understanding. So even with hybrid version (40e in my case) would still be advised to use a separate power supply/charger/another vehicle as jump.

[samsonx]

Originally Posted by mariob

One question: How do you update the rear entertainment screens with ID5 layout to ID6?

I would also like to know this.. I am preparing to update my 2017 with RSE and am curious what kind of dependencies I see when I connect esys and start stepping through the guide.

I'll let you know if I find anything useful out!

[mariob]

Originally Posted by samsonx

I would also like to know this.. I am preparing to update my 2017 with RSE and am curious what kind of dependencies I see when I connect esys and start stepping through the guide.

I'll let you know if I find anything useful out!

Hello Samson! I haven't updated RSE yet, I just changed the layout from ID5 to ID6, follow this path: RSE_HIGH_NBT2 26 / "HMI / HMI_ID_VERSION change to id6_light"
That's how I did it. on my F86.

[la2uw4nl]

everyone psdzdata ista and esys same or not

[shawnsheridan]

Originally Posted by la2uw4nl

everyone psdzdata ista and esys same or not

Same.

[la2uw4nl]

Originally Posted by shawnsheridan

Same.

THANKS shawn

[bcintron]

Is the ICOM required for this or will just the standard ENET cable work?

[shawnsheridan]

Originally Posted by bcintron

Is the ICOM required for this or will just the standard ENET cable work?

ENET Cable is fine.